Skip to content > 
Contact Us
Contact Us
The World's Only
Air-Driven Home
Elevator.
NOW AVAILABLE ACROSS WASHINGTON
A PVE home elevator uses air pressure to raise the cab and gravity to lower it. With no pit, machine room, or hydraulic system required, homeowners from Seattle and Tacoma to Gig Harbor can add floor-to-floor access without major construction.
3 SIZES
AVAILABLE
Panoramic Design
No Shaft, Pit, or Machine Room Required
Installed
in 2 to 3 Days
Pneumatic Technology
Built for the Way
WASHINGTON LIVES
Tacoma, Seattle, and Gig Harbor feature historic and hillside homes with upper floors, finished basements, and daylight lower levels connected by stairs. Sloped lots and historic review requirements can make major structural changes more difficult.
That’s exactly the kind of home a PVE elevator was built for. Because the unit is self-supporting and needs no pit, shaft, or machine room, it can go into a North Slope Craftsman in Tacoma or a hillside home in Seattle without a major structural rework. Most installations are done in two to three days, which matters given how a full elevator project with structural modifications and historic review can otherwise stretch out.
For homeowners planning to stay in their Washington home long term, a PVE elevator means a finished basement or an upstairs bedroom stops being out of reach. It connects levels without reworking a home’s historic character or its relationship to a hillside or waterfront lot. And because the system draws minimal power and pairs easily with solar, it fits naturally alongside the growing interest in energy-efficient upgrades across the state.
4 Models.
One for Every Home.
Whether you live in a Craftsman in Tacoma’s North Slope Historic District, a hillside home in Seattle, or a waterfront property in Gig Harbor, there is a PVE model built for your space.
testimonials
My house was built in 1925 and it was hard to get something to fit in with the décor of my home, but the PVE fit in perfectly.
I am thrilled with the design, engineering, and reliability of the elevator by PVE.
We are not age-limited with the elevator. At any age, it’s like living on a single floor.
We’ve been here 5 years and it’s never needed anything. The elevator has been flawless.
It Turns A 2-Story Into A Ranch Concept!
It’s for the ease & access but also for the resale. In think the investment is worth it!
INTRODUCING
PAY AS YOU GO
Bring a PVE into your home now with flexible payment options designed to fit your lifestyle. Enjoy comfort and independence without the upfront burden.
THE CLEANEST HOME ELEVATOR ON THE MARKET
Washington homeowners often prioritize efficient, low-maintenance upgrades. A PVE elevator uses no oils, hydraulic fluid, or lubricants, and gravity lowers the cab, reducing leak risks and service needs.
It runs on standard household current at low draw and works with many solar-equipped homes. With no hydraulic reservoir or fluid to maintain, ownership stays simple.
The most sustainable home elevator available. Anywhere.
THE CLEANEST HOME ELEVATOR ON THE MARKET
Washington homeowners often prioritize efficient, low-maintenance upgrades. A PVE elevator uses no oils, hydraulic fluid, or lubricants, and gravity lowers the cab, reducing leak risks and service needs.
It runs on standard household current at low draw and works with many solar-equipped homes. With no hydraulic reservoir or fluid to maintain, ownership stays simple.
The most sustainable home elevator available. Anywhere.
WHY HOMEOWNERS CHOOSE PVE
Certified and Safety-Tested
Every PVE elevator is built to meet national safety standards and independently tested before it ever reaches a home. If power is interrupted, the cab is designed to descend safely on its own rather than stopping mid-shaft.
Ready for a Power Outage
Washington sees its share of winter storms and power outages. A PVE elevator’s auto-descend function brings the cab safely to the ground floor if the power drops, and a battery backup option is available for added peace of mind.
Designed to Be Seen, Not Hidden
The 360-degree glass cab isn’t boxed into a closet or hallway. It becomes part of the room, showing off natural light and, in plenty of Washington homes, a view of the water or the mountains from an unexpected angle.
Low Maintenance by Design
There are no oils, gases, or lubricants to top off or replace. That means fewer service calls and less to worry about long after installation.
No Shaft, No Pit, No Machine Room
The structure supports itself, so it can go into an existing home without a foundation dig or a dedicated equipment room, which matters in Washington’s historic homes and on hillside or waterfront lots
Built and Tested Before It Ships
Contact Us
Common Questions
About Home Elevators
in WASHINGTON
Can a home elevator be added to an existing Washington home?
Yes. PVE elevators are designed for retrofits and don’t require a pit, shaft, or separate machine room, which makes them a practical option for historic homes and hillside or waterfront properties.
How much space does a PVE elevator need?
Most models fit in a footprint similar to a large closet, roughly 30 to 52 inches in diameter depending on the model, so it can usually be placed without a major layout change.
Is a home elevator a good option for aging in place?
Many Washington homeowners install a PVE elevator specifically to stay in a multi-story home longer, connecting a main floor to an upstairs bedroom or basement without relying on stairs.
Do I need a machine room or pit?
No. The self-supporting design eliminates the need for a hoistway, pit, or separate machine room that a traditional hydraulic elevator would require.
What does a home elevator cost in Washington?
Cost depends on the model, the number of floors served, and site-specific factors like ceiling height and finish work. A local PVE dealer can walk through pricing for your specific home.
What permits are required in Washington?
Elevator installation statewide is regulated by the Washington State Department of Labor & Industries (L&I) Elevator Program under Chapter 296-96 WAC, which adopts the ASME A17.1/CSA B44 safety standards. A licensed elevator contractor must complete a permit application before installation, and local building departments may also be involved depending on the scope of the project. Homes within a local historic district may require additional design review for exterior or structural changes.
Is there a PVE model for wheelchair accessibility?
Yes. PVE offers models designed to accommodate wheelchair access. A dealer can help identify which model fits your home and mobility needs.
Contact Us
Looking for something different?
Serving Homeowners Across WASHINGTON
PVE dealers serve homeowners throughout Washington, from Seattle and Tacoma to Gig Harbor, Spokane, and communities across the state. Wherever you’re located in Washington, there’s a dealer ready to help you find the right fit for your home.
- Seattle
- Tacoma
- Gig Harbor
- Bellevue
- Spokane
- Bellingham
- Vancouver
- And More!
Contact Us
4151 West 108th Street Suite # 1 Hialeah, FL 33018
(855) 282-8087
support@vacuumelevators.com
Mon - Fri 8am - 4pm EST | Sat - Sun Closed
