Home elevators · Colorado
Home Elevators in Colorado
Modern Technology. Intelligent Solutions. Distinctive Design.
- 3 Sizes Available
- Panoramic Design
- No Shaft, Pit, or Machine Room Required
- Installed in 2 to 3 Days
- Pneumatic Technology
Get a free quote
15,000+
installations worldwide
90+
countries served
2002
manufacturing since
2–3
days to install
1–3
passengers
Home elevators in Colorado
The World's Only Air-driven Home Elevator
Now Available Across Colorado
A PVE home elevator moves your cab using changes in air pressure instead of a hydraulic piston, cable, or counterweight system. A vacuum pump at the top of the unit gently pulls air from below the cab, and it rises. To descend, air is let back in and gravity does the rest. There’s no pit to dig, no separate machine room to build, and no oil-based hydraulic system to maintain. Homeowners from Denver to Aspen are installing PVE elevators to move easily between floors without a major construction project.
Models
4 Models.
One for Every Home.
Whether you live in a hillside home in Aspen, a historic bungalow in Denver, or a newer build in Boulder or Colorado Springs, there is a PVE model built for your space.
PVE30
Compact living
30 inches | 1 passenger
Start here for one rider when conserving floor space is a priority.
PVE37
Room for two
37 inches | 2 passengers
Compare this round model when you want room for two riders within its rated capacity.
PVE52
Wheelchair-fit assessment
52 11/16 inches | 3 passengers
Start here when wheelchair access is a project requirement. Confirm the chair, rider, door opening and cabin fit together.
The Cube
A different perspective
36 x 36 inches | 2 passengers
Consider this square model for a two-person layout, including potential corner placement after a site review.
PVE52 wheelchair suitability depends on the individual chair and user. Residential wheelchair access does not mean ADA compliance.
Why PVE
Built for the Way Colorado Lives
Colorado’s homes are shaped by its terrain as much as its history. In mountain towns like Aspen, Vail, and Telluride, multi-level homes are built into steep hillsides, while Denver and Front Range homes often include full basements reached only by narrow original staircases. In both cases, a traditional elevator’s pit and shaft requirements can be difficult to fit into a mountainside home or century-old floor plan.
That’s exactly the kind of home a PVE elevator was built for. Because the unit is self-supporting and needs no pit, shaft, or machine room, it can go into an Aspen hillside home or a Denver bungalow without a major structural rework. Most installations are done in two to three days, which matters given how a full elevator project with structural modifications and permitting can stretch out, whether the challenge is a historic home’s tight basement or a mountain home’s steep grade.
For homeowners planning to stay in their Colorado home long term, a PVE elevator means the stairs stop being the reason a favorite mountain retreat or a family home no longer works. It connects levels without reworking a home’s historic character or its relationship to a mountainside. And because the system draws minimal power and pairs easily with solar, it fits naturally alongside the growing number of Colorado homes adding solar at altitude and in the Front Range alike.
The Cleanest Home Elevator on the Market
Colorado homeowners are increasingly adding solar and energy-efficient upgrades. A PVE elevator uses no oils, hydraulic fluid, or lubricants, and gravity lowers the cab, reducing energy use and maintenance.
Because it runs on standard household current at low draw, it works well with solar-powered homes. There is no hydraulic fluid to dispose of or reservoir to maintain.
The most sustainable home elevator available. Anywhere.
Why Homeowners Choose PVE
- Certified and Safety-TestedEvery PVE elevator is built to meet national safety standards and independently tested before it ever reaches a home. If power is interrupted, the cab is designed to descend safely on its own rather than stopping mid-shaft.
- Ready for a Power OutageColorado sees its share of winter storms and mountain power outages. If the power fails while the elevator is moving, the cab descends to the lowest level at safety speed and the mechanical door lock opens so passengers can exit.
- Designed to Be Seen, Not HiddenThe 360-degree glass cab isn’t boxed into a closet or hallway. It becomes part of the room, showing off natural light and, in plenty of Colorado homes, a view of the mountains from an unexpected angle.
- Low Maintenance by DesignWith no oils, gases, or lubricants to replace, PVE elevators require fewer service visits—an advantage in mountain communities.
- No Shaft, No Pit, No Machine RoomThe self-supporting structure fits into existing homes without a foundation dig or equipment room—ideal for steep hillside lots and older Front Range homes with tight basements.
- Built and Tested Before It ShipsEvery unit is assembled and tested at PVE’s factory before it’s shipped, including installations throughout Colorado, so what arrives on site is ready to install, not ready to troubleshoot.
Gallery
Real PVE installations
Testimonials
What homeowners say
My house was built in 1925 and it was hard to get something to fit in with the décor of my home, but the PVE fit in perfectly. I am thrilled with the design, engineering, and reliability of the elevator by PVE.
PVE homeowner
We are not age-limited with the elevator. At any age, it’s like living on a single floor. We’ve been here 5 years and it’s never needed anything. The elevator has been flawless.
PVE homeowner
It Turns A 2-Story Into A Ranch Concept! It’s for the ease & access but also for the resale. In think the investment is worth it!
PVE homeowner
From idea to installation
What happens during installation?
Your installation plan should cover the work before the elevator arrives as well as assembly and testing.
- Review the homeConfirm the layout, the people using the elevator and the levels it needs to serve.
- Confirm the model and locationCheck dimensions, landing access and the requirements for the selected configuration.
- Prepare the siteComplete the agreed structural and electrical work and arrange the required permits and inspections.
- Install and hand overAssemble and test the elevator, complete required approvals, and explain operation and ongoing care.
Timing depends on site preparation, the selected model and local requirements.
Can a home elevator be added to an existing Colorado home?
Yes. PVE elevators are designed for retrofits and don’t require a pit, shaft, or separate machine room, which makes them a practical option for hillside mountain homes and older Front Range houses with tight basements.
How much space does a PVE elevator need?
A PVE elevator has a compact, self-supporting footprint that varies by model and rests on the existing floor, so it can usually be placed without a major layout change.
Is a home elevator a good option for aging in place?
Many Colorado homeowners install a PVE elevator specifically to stay in a multi-level home longer, connecting a main floor to an upstairs bedroom or lower level without relying on stairs.
Do I need a machine room or pit?
No. The self-supporting design eliminates the need for a hoistway, pit, or separate machine room that a traditional hydraulic elevator would require.
What does a home elevator cost in Colorado?
Cost depends on the model, the number of floors served, and site-specific factors like ceiling height and finish work. A local PVE dealer can walk through pricing for your specific home.
What permits are required in Colorado?
Colorado regulates elevators statewide through the Department of Labor and Employment’s Division of Oil and Public Safety, under the Elevator and Escalator Certification Act and its Conveyance Regulations. Depending on where a home is located, this authority may be delegated to a local jurisdiction, such as a city or county building department, that administers its own equivalent program.
Is there a PVE model for wheelchair accessibility?
Yes. PVE offers models designed to accommodate wheelchair access. A dealer can help identify which model fits your home and mobility needs.
Service area
Serving Homeowners Across Colorado
PVE dealers serve homeowners throughout Colorado, from Denver and the Front Range to the mountain communities of Aspen, Vail, and Telluride. Wherever you’re located in Colorado, there’s a dealer ready to help you find the right fit for your home.
- Denver
- Boulder
- Colorado Springs
- Aspen
- Vail
- Telluride
- Fort Collins
- Castle Rock
More from PVE
Looking for something different?
Contact us
Request a quote for your home.
Tell us where you are planning to install an elevator in Colorado and what you need it to do. Share the number of floors, whether the home is already built, and any mobility or space requirements.
- Head office4151 West 108th Street, Suite #1, Hialeah, FL 33018
- Phone(855) 282-8087
- Email[email protected]
- HoursMon - Fri 8am - 4pm EST | Sat - Sun Closed