Home elevators · Connecticut
Home Elevators in Connecticut
Air-Powered Design. Innovative Solutions. Panoramic Modern Style.
- 3 Sizes Available
- Panoramic Design
- No Shaft, Pit, or Machine Room Required
- Installed in 2 to 3 Days
- Pneumatic Technology
Get a free quote
15,000+
installations worldwide
90+
countries served
2002
manufacturing since
2–3
days to install
1–3
passengers
Home elevators in Connecticut
The World's Only Air-Driven Home Elevator.
Now Available Across Connecticut
A PVE home elevator moves your cab using changes in air pressure instead of a hydraulic piston, cable, or counterweight system. A vacuum pump at the top of the unit gently pulls air from below the cab, and it rises. To descend, air is let back in and gravity does the rest. There’s no pit to dig, no separate machine room to build, and no oil-based hydraulic system to maintain, which is why homeowners from Greenwich to Hartford and out toward New Haven and Litchfield County are installing PVE elevators without a major construction project.
Models
4 Models.
One for Every Home.
Whether you live in a colonial home in Litchfield County, a Victorian in Hartford’s West End, or a shoreline house near Greenwich, there is a PVE model built for your space.
PVE30
Compact living
30 inches | 1 passenger
Start here for one rider when conserving floor space is a priority.
PVE37
Room for two
37 inches | 2 passengers
Compare this round model when you want room for two riders within its rated capacity.
PVE52
Wheelchair-fit assessment
52 11/16 inches | 3 passengers
Start here when wheelchair access is a project requirement. Confirm the chair, rider, door opening and cabin fit together.
The Cube
A different perspective
36 x 36 inches | 2 passengers
Consider this square model for a two-person layout, including potential corner placement after a site review.
PVE52 wheelchair suitability depends on the individual chair and user. Residential wheelchair access does not mean ADA compliance.
Why PVE
Built for the Way Connecticut Lives
Connecticut has one of the oldest housing stocks in the country, and it shows. Towns across the state are full of colonial and center-chimney homes dating back to the 1700s and 1800s, along with Victorian houses and Colonial Revivals built with two or three full stories and narrow, steep staircases connecting them. Many of these homes have been lovingly maintained or restored over generations, but they were never built with an elevator in mind, and modifying a historic home’s structure to fit a traditional elevator’s pit and shaft can be a serious undertaking, especially in a designated historic district.
That’s exactly the kind of home a PVE elevator was built for. Because the unit is self-supporting and needs no pit, shaft, or machine room, it can go into an 18th-century colonial in Litchfield County or a Victorian in Hartford’s West End without touching the original framing. Most installations are done in two to three days, which matters for homeowners who want to avoid a long, disruptive renovation in a house that’s stood for two hundred years.
For homeowners planning to stay in their Connecticut home long term, a PVE elevator means the stairs stop being the reason to move. It connects a main floor to an upstairs bedroom or a finished lower level without reworking the home’s historic character. And because the system draws minimal power and pairs easily with solar, it fits naturally alongside the growing interest in energy-efficient upgrades for older New England homes.
The Cleanest Home Elevator on the Market
Connecticut homeowners are increasingly looking for upgrades that fit with energy-efficient, historically sensitive renovations. A PVE elevator uses no oils, no hydraulic fluid, and no lubricants, and it uses gravity, not motor power, to bring the cab back down. There’s nothing to leak into a historic home’s basement and nothing that requires the kind of ongoing servicing a hydraulic system does. Because the system runs on standard household current at low draw, it works well alongside an existing solar array, increasingly common on updated homes across the state.
The most sustainable home elevator available. Anywhere.
Why Homeowners Choose PVE
- Certified and Safety-TestedEvery PVE elevator is built to meet national safety standards and independently tested before it ever reaches a home. If power is interrupted, the cab is designed to descend safely on its own rather than stopping mid-shaft.
- Ready for a Power OutageConnecticut sees its share of nor’easters and seasonal power outages. If the power fails while the elevator is moving, the cab descends to the lowest level at safety speed and the mechanical door lock opens so passengers can exit.
- Designed to Be Seen, Not HiddenThe 360-degree glass cab isn’t boxed into a closet or hallway. It becomes part of the room, showing off natural light and, in plenty of Connecticut homes, a view of the surrounding landscape from an unexpected angle.
- Low Maintenance by DesignThere are no oils, gases, or lubricants to top off or replace. That means fewer service calls and less to worry about long after installation.
- No Shaft, No Pit, No Machine RoomThe structure supports itself, so it can go into an existing home without a foundation dig or a dedicated equipment room, which matters in Connecticut’s older homes with historic framing and tight basements.
- Built and Tested Before It ShipsEvery unit is assembled and tested at PVE’s factory before it’s shipped, including installations throughout Connecticut, so what arrives on site is ready to install, not ready to troubleshoot.
Gallery
Real PVE installations
Testimonials
What homeowners say
My house was built in 1925 and it was hard to get something to fit in with the décor of my home, but the PVE fit in perfectly. I am thrilled with the design, engineering, and reliability of the elevator by PVE.
PVE homeowner
We are not age-limited with the elevator. At any age, it’s like living on a single floor. We’ve been here 5 years and it’s never needed anything. The elevator has been flawless.
PVE homeowner
It Turns A 2-Story Into A Ranch Concept! It’s for the ease & access but also for the resale. In think the investment is worth it!
PVE homeowner
From idea to installation
What happens during installation?
Your installation plan should cover the work before the elevator arrives as well as assembly and testing.
- Review the homeConfirm the layout, the people using the elevator and the levels it needs to serve.
- Confirm the model and locationCheck dimensions, landing access and the requirements for the selected configuration.
- Prepare the siteComplete the agreed structural and electrical work and arrange the required permits and inspections.
- Install and hand overAssemble and test the elevator, complete required approvals, and explain operation and ongoing care.
Timing depends on site preparation, the selected model and local requirements.
Can a home elevator be added to an existing Connecticut home?
Yes. PVE elevators are designed for retrofits and don’t require a pit, shaft, or separate machine room, which makes them a practical option for historic and older Connecticut homes.
How much space does a PVE elevator need?
A PVE elevator has a compact, self-supporting footprint that varies by model and rests on the existing floor, so it can usually be placed without a major layout change.
Is a home elevator a good option for aging in place?
Many Connecticut homeowners install a PVE elevator specifically to stay in a multi-story home longer, connecting a main floor to an upstairs bedroom without relying on stairs.
Do I need a machine room or pit?
No. The self-supporting design eliminates the need for a hoistway, pit, or separate machine room that a traditional hydraulic elevator would require.
What does a home elevator cost in Connecticut?
Cost depends on the model, the number of floors served, and site-specific factors like ceiling height and finish work. A local PVE dealer can walk through pricing for your specific home.
What permits are required in Connecticut?
Connecticut state law specifically allows lifts and elevators to be installed in residential buildings designed for one or two families, and installation work must be done in accordance with the State Building Code. Elevator repair persons and installers are licensed by the Connecticut Department of Consumer Protection, and the State Elevator Inspector oversees compliance statewide.
Is there a PVE model for wheelchair accessibility?
Yes. PVE offers models designed to accommodate wheelchair access. A dealer can help identify which model fits your home and mobility needs.
Service area
Serving Homeowners Across Connecticut
PVE dealers serve homeowners throughout Connecticut, from the Gold Coast towns near Greenwich to the Litchfield Hills and the shoreline communities along Long Island Sound. Wherever you’re located in Connecticut, there’s a dealer ready to help you find the right fit for your home.
- Greenwich
- Stamford
- New Haven
- Hartford
- Westport
- Danbury
- Litchfield
More from PVE
Looking for something different?
Contact us
Request a quote for your home.
Tell us where you are planning to install an elevator in Connecticut and what you need it to do. Share the number of floors, whether the home is already built, and any mobility or space requirements.
- Head office4151 West 108th Street, Suite #1, Hialeah, FL 33018
- Phone(855) 282-8087
- Email[email protected]
- HoursMon - Fri 8am - 4pm EST | Sat - Sun Closed