Home Elevators in Johns Creek, GA
Stay in your Johns Creek home and reach every floor with ease. Our air-driven elevators fit existing homes with no pit and little remodeling.
Prefer to talk? Call 813-548-4339
What happens next
- Tell us about your home
- A PVE specialist contacts you
- Get a quote for your home
Request a Quote
Tell us about your Johns Creek home and we will send you a free, no-pressure quote.
A PVE air-driven home elevator with its panoramic, see-through cabin, shown in a home setting.
Keep every floor of your Johns Creek home within reach.
An air-driven elevator that fits the home you have, without a major remodel.
You know your Johns Creek home well. You know which step creaks, how long the climb to the bedrooms takes, and how much harder it feels than it did a few years ago. A home elevator lets you keep every floor of the house you love, without planning each day around the stairs.
Our elevators are air-driven. Air pressure lifts the cabin, and gravity helps it come down. Because each unit is self-supporting, it rests on your existing floor and carries its own weight. In standard installations there is no pit to dig, no shaft to frame and no machine room to give up.
That suits a two- or three-story family home. The elevator can sit beside the stairs, in a corner of a living room or in a pair of stacked closets, and the round, see-through cabin keeps the room feeling open. If you are building or remodeling, your builder can plan the space from day one.
The cleanest home elevator on the market.
The system runs on household power, with no oils to change and no pit to keep dry, so it stays quiet and tidy in your home. If you want, a solar panel package is available as an option.
- 01Air lifts you up
A vacuum pump at the top of the unit changes the air pressure and the cab rises.
- 02Gravity brings you down
Air is let back in and the cab descends. No oils, hydraulic fluid or lubricants.
- 03Runs on household current
Low power draw, so it works alongside the solar arrays many homes now have.
The most sustainable home elevator available. Anywhere.
- Pneumatic technology
- No shaft, pit or machine room
- Installed in 2 to 3 days
- Panoramic design
- Three sizes and a square
Four models. One for every home.
If your stairs leave only a small corner free, the PVE30 carries one rider in the smallest footprint. The PVE37 and The Cube give room for two, a good fit for a couple who want to ride together. If someone in your family uses a wheelchair, start with the PVE52, our only wheelchair-accessible model.
PVE30
- Riders
- 1 passenger
Start here for one rider when conserving floor space is a priority.
Explore PVE30
PVE37
- Riders
- 2 passengers
Compare this round model when you want room for two riders within its rated capacity.
Explore PVE37
PVE52
- Riders
- 3 passengers
Start here when wheelchair access is a project requirement. Confirm the chair, rider, door opening and cabin fit together.
Explore PVE52
The Cube
- Riders
- 2 passengers
Consider this square model for a two-person layout, including potential corner placement after a site review.
Explore The CubePVE52 wheelchair suitability depends on the individual chair and user. Residential wheelchair access does not mean ADA compliance.
Serving homeowners across Georgia.
We serve homeowners in Johns Creek and across Georgia through our authorized dealer network. Wherever your home sits, the process is the same. You tell us about your house and who will ride, a dealer visits to look at the space, and you get a quote built around your home. Nearby cities with their own pages are linked here, so you can see how we work in the communities around you.
- Johns CreekYou are here
- Alpharetta
- Atlanta
Safe, simple and made to be seen.
Here is what an air-driven elevator brings to a two- or three-story home, and why it suits families who plan to stay in the house they already have.
No pit, no shaft, no machine room
Because the elevator is self-supporting, it rests on your existing floor and carries its own weight. In standard installations, nothing is dug below it and no shaft is built around it. Your rooms keep their shape, and the work stays small for a home you already live in.
Fits where space is tight
The compact models fit spots many people never thought could hold an elevator, like the corner beside a staircase or a pair of stacked closets. You give up very little floor space, and the rest of the room stays yours to use the way you always have.
A calm ride down in a power cut
If the power fails while you ride, the cabin lowers slowly to the lowest floor and the door unlocks so you can step out. No one needs to come and get you. It is the kind of detail that lets an older parent ride alone with confidence.
A view all the way around
The panoramic design gives a full 360 degree view from inside the cabin. The round, clear-panel cylinder lets light through and feels open, which matters to riders who dislike closed boxes. It also looks like a design piece in your home rather than a medical device.
Quick to install
Once site prep is complete, the install typically takes 2 to 3 days. That means fewer days with workers in your home and a faster return to normal life. The prep itself depends on your house, and your dealer will explain it before you commit.
Assembled in the USA, backed by the maker
Every elevator is assembled in the USA and factory-tested in Miami, Florida. PVE has designed and manufactured air-driven home elevators since 2002 and works through authorized dealers trained at its Miami facility. You deal with a local team, backed by the company that created the technology.
Real PVE installations.
What homeowners say.
Real words from families who added a PVE elevator to the home they love.
We are not age-limited with the elevator. At any age, it's like living on a single floor. We've been here 5 years and it's never needed anything. The elevator has been flawless.
My house was built in 1925 and it was hard to get something to fit in with the décor of my home, but the PVE fit in perfectly. I am thrilled with the design, engineering, and reliability of the elevator by PVE.
It turns a 2-story into a ranch concept! It's for the ease & access but also for the resale. I think the investment is worth it!
What happens during installation?
Your installation plan should cover the work before the elevator arrives as well as assembly and testing.
- Review the home
Confirm the layout, the people using the elevator and the levels it needs to serve.
- Confirm the model and location
Check dimensions, landing access and the requirements for the selected configuration.
- Prepare the site
Complete the agreed structural and electrical work and arrange the required permits and inspections.
- Install and hand over
Assemble and test the elevator, complete required approvals, and explain operation and ongoing care.
Timing depends on site preparation, the selected model and local requirements.
Let's talk numbersHome elevator cost in Johns Creek.
In Johns Creek, the price of your project depends on the model you pick, how many floors it serves and how much prep your home needs, such as openings through finished ceilings, a level base and a new electrical circuit. Permit fees and any options add to it, and a free quote gives the price for your home.
For what shapes the price before you talk to us, read our guide to home elevator cost.
What affects your price
- ModelPVE30, PVE37, PVE52 or The Cube
- FloorsHow many levels the elevator serves
- Site workElectrical and structural prep, permits
- FinishThe colors and options you choose
Questions from Johns Creek homeowners
Is there room for an elevator in a house like mine?
In many homes, yes, because our elevators take up less floor space than many traditional home elevators. The smallest model fits in a spot not much bigger than a closet, and none of them need a shaft built around them. In a two- or three-story Johns Creek home, good spots are often beside the stairs, in stacked closets or in a corner of a large room. A dealer visit confirms the best place for yours.
Does the city need to approve it before work starts?
In most cases, yes, a home elevator needs a building permit before it goes in. In Johns Creek, as in most places, the permit comes from the local building department, and an inspection usually follows once the work is done. Your authorized PVE dealer knows the paperwork and can guide you through what your project needs. Timing varies, so it helps to start the permit step early, while you choose a model and a spot.
How many days will the installers be in our house?
The elevator itself typically goes in over 2 to 3 days once the site prep is complete. Before that, a contractor cuts the opening in your floor, makes sure the floor is level and adds a dedicated electrical circuit. That prep is where most of the time goes, and it depends on your home. You can usually stay in the house the whole time, since the work stays in one small area.
If the lights go out mid-ride, what happens?
You come down safely without doing anything. If the power fails while the elevator is moving, the cabin lowers slowly to the lowest floor and the door unlocks so you can step out. You do not need to call anyone or wait for help. That matters on an evening when the power flickers, and it is one reason families feel at ease letting a parent ride alone.
Which one works for a wheelchair user in our family?
The PVE52 is the one to look at, because it is our only wheelchair-accessible model. It has the widest door and the roomiest cabin of our range. It is not ADA compliant, and not every wheelchair fits, so we ask you to ride one first with your own chair at a PVE authorized dealer. That simple test tells you more than any brochure, and your dealer can then plan the spot in your Johns Creek home.
What kind of upkeep should I plan for?
Plan on regular checkups, not big repairs. Our elevators are low maintenance, and they use no harmful oils, gases or lubricants. Your authorized dealer sets a service schedule and does the inspections, so you have one local team to call when you need anything. Keeping the elevator inside the heated and cooled part of your home also helps, since it is not meant to run in a cold space.
What makes one quote higher than another?
The main things are the model you choose, how many floors it serves and how much prep your house needs. A two-stop install in an open spot is simpler than a three-floor run that needs openings cut through finished ceilings. Options such as an automatic door or a folding seat add to it too. The only way to know your number is a free quote based on your own Johns Creek home.
Can it go all the way down to our basement?
Yes, in many cases it can, because the PVE30, PVE37 and PVE52 serve up to 5 stops. If your home has a basement, a main floor and an upper floor, one elevator can link all three. The basement floor must be level, and the spot must be inside the heated and cooled part of the house. The Cube serves two or three stops, so it can work too. Your dealer will check the layout during the visit.
Built for the way Johns Creek lives.
- Homes we fit
- Two- and three-story houses, with or without a basement
- What it needs
- A level floor, a floor opening or balcony, its own circuit
- Install time
- Typically 2 to 3 days after site prep
- Who installs
- An authorized PVE dealer
Start with the house you have. If you own a two-story home, the simplest plan is often an elevator that links the main floor to the bedrooms. If your home has a finished basement or a third floor, one elevator can serve those levels too. The real question is not whether your home is big enough. It is where a small, round cabin can stand on a level floor with a clear path in and out.
Most families look first at the space beside the staircase, a pair of stacked closets, or a corner of a room with a tall ceiling. Each has its own appeal. A stacked closet keeps the elevator out of sight. A spot near the stairs keeps traffic where it already goes. An open corner shows off the panoramic design and lets light pass through the cabin. Your dealer will walk the home with you and point out what works.
Next comes the prep work. Before the elevator arrives, a contractor will make sure the floor under it is level, cut a finished opening through each floor it passes, and run a dedicated electrical circuit. If your upper level is an open landing or balcony, the elevator can rise beside it instead of through a floor. None of this calls for a pit or a new wall built around the unit.
Comfort inside your home matters too. The elevator is meant for heated and cooled living space, not a cold garage or an open porch. If the spot you like sits in a room that gets chilly, your dealer will tell you and suggest a better one. This is also the time to think about doors. Every model can open on the same side at each floor, and some can also open on the opposite side or at a right angle, which helps in tight hallways.
Then there is the permit. A home elevator in Johns Creek, as in most places, goes through the local building department, and an inspection typically follows the install. You do not have to learn the rules alone. Your authorized PVE dealer has handled this kind of paperwork and can tell you what your project needs. Timing varies from job to job, so it is smart to start while you settle on a model.
Once the prep is done and the permit is in hand, the install itself is quick. The work stays in one part of the house, so you can keep living at home. When the team is finished, they show you how to call the cabin, how to ride it and who to contact with any question.
No pit to dig. No shaft to frame. Typically 2 to 3 days to install once prep is done.
Think about who will ride it, too. A couple planning to age in place may want the PVE37 or The Cube, so both can ride together. A parent in a main-floor suite may only need a compact cabin to visit family upstairs. A wheelchair user calls for the PVE52, and a test ride first. Tell us who it is for, and we will help you match the model to your household.
After the install, the same dealer looks after your elevator. Our dealers are trained at our Miami facility, and they schedule the regular checkups that keep it running well. That gives you one local contact for questions, service and any change you want to make later.
Find the right elevator for your Johns Creek home.
Tell us a little about your house, the floors you want to reach and who will ride. An authorized PVE dealer will follow up, answer your questions and set up a visit to look at the space. The quote is free, with no pressure.
813-548-4339- Head office
- 4151 West 108th Street, Suite #1, Hialeah, FL 33018
- Phone
- 813-548-4339
- [email protected]
- Hours
- Mon – Fri 8am – 4pm EST · Sat – Sun closed
Request a Free Consultation
Share a few details about your home and we will be in touch soon.