Home elevators · Oregon
Home Elevators in Oregon
Quiet Power. Small Footprint. Room With a View.
- 3 Sizes Available
- Panoramic Design
- No Shaft, Pit, or Machine Room Required
- Installed in 2 to 3 Days
- Pneumatic Technology
Get a free quote
15,000+
installations worldwide
90+
countries served
2002
manufacturing since
2–3
days to install
1–3
passengers
Home elevators in Oregon
The World's Only Air-Driven Home Elevator.
Now Serving Homeowners Across Oregon
A PVE home elevator uses air pressure to raise the cab and gravity to lower it. With no pit, machine room, or hydraulic system required, homeowners from Portland and Bend to Salem and Eugene can add floor-to-floor access without major construction.
Models
4 Models.
One for Every Home.
Whether you live in a Craftsman bungalow in Hawthorne, a hillside home in Portland’s West Hills, or a newer build near Bend, there is a PVE model built for your space.
PVE30
Compact living
30 inches | 1 passenger
Start here for one rider when conserving floor space is a priority.
PVE37
Room for two
37 inches | 2 passengers
Compare this round model when you want room for two riders within its rated capacity.
PVE52
Wheelchair-fit assessment
52 11/16 inches | 3 passengers
Start here when wheelchair access is a project requirement. Confirm the chair, rider, door opening and cabin fit together.
The Cube
A different perspective
36 x 36 inches | 2 passengers
Consider this square model for a two-person layout, including potential corner placement after a site review.
PVE52 wheelchair suitability depends on the individual chair and user. Residential wheelchair access does not mean ADA compliance.
Why PVE
Built for the Way Oregon Lives
Oregon’s cities are full of homes that were never built with an elevator in mind. Portland is known for preserving its early-1900s housing stock, and neighborhoods like Hawthorne, Alberta, and Laurelhurst are dense with Craftsman bungalows and four-square houses with narrow floor plans and steep interior stairs. On the hilly West Side, homes climb the terrain itself, which makes a traditional elevator’s pit and shaft requirements even harder to work around.
That’s exactly the kind of home a PVE elevator was built for. Because the unit is self-supporting and needs no pit, shaft, or machine room, it can go into a century-old bungalow in Hawthorne or a hillside home in Portland’s West Hills without touching the foundation. Most installations are done in two to three days.
For homeowners planning to stay in their Oregon home long term, a PVE elevator means the stairs stop being the reason to move. It connects a main floor to an upstairs bedroom or a basement without hallways or landings feeling reworked around it. And because the system draws minimal power and pairs easily with solar, it fits naturally into a state where energy-conscious upgrades are increasingly common on older homes
The Cleanest Home Elevator on the Market
Oregon homeowners often prioritize efficient, low-maintenance upgrades. A PVE elevator uses no oils, hydraulic fluid, or lubricants, and gravity lowers the cab.
It also runs on standard household current at low draw, making it compatible with many solar-equipped homes.
The most sustainable home elevator available. Anywhere.
Why Homeowners Choose PVE
- Certified and Safety-TestedEvery PVE elevator is built to meet national safety standards and independently tested before it ever reaches a home. If power is interrupted, the cab is designed to descend safely on its own rather than stopping mid-shaft.
- Ready for a Power OutageOregon sees its share of winter storms and power outages. If the power fails while the elevator is moving, the cab descends to the lowest level at safety speed and the mechanical door lock opens so passengers can exit.
- Designed to Be SeenThe 360-degree glass cab isn’t boxed into a closet or hallway. It becomes part of the room, showing off natural light and, in plenty of Oregon homes, a view of the hills or the Cascades from an unexpected angle.
- Low Maintenance by DesignThere are no oils, gases, or lubricants to top off or replace. That means fewer service calls and less to worry about long after installation.
- No Shaft, No Pit, No Machine RoomThe structure supports itself, so it can go into an existing home without a foundation dig or a dedicated equipment room, which matters in older Oregon houses with tight basements or hillside lots.
- Built and Tested Before It ShipsEvery unit is assembled and tested at PVE’s factory before it’s shipped, including installations throughout Oregon, so what arrives on site is ready to install, not ready to troubleshoot.
Gallery
Real PVE installations
Testimonials
What homeowners say
My house was built in 1925 and it was hard to get something to fit in with the décor of my home, but the PVE fit in perfectly. I am thrilled with the design, engineering, and reliability of the elevator by PVE.
PVE homeowner
We are not age-limited with the elevator. At any age, it’s like living on a single floor. We’ve been here 5 years and it’s never needed anything. The elevator has been flawless.
PVE homeowner
It Turns A 2-Story Into A Ranch Concept! It’s for the ease & access but also for the resale. In think the investment is worth it!
PVE homeowner
From idea to installation
What happens during installation?
Your installation plan should cover the work before the elevator arrives as well as assembly and testing.
- Review the homeConfirm the layout, the people using the elevator and the levels it needs to serve.
- Confirm the model and locationCheck dimensions, landing access and the requirements for the selected configuration.
- Prepare the siteComplete the agreed structural and electrical work and arrange the required permits and inspections.
- Install and hand overAssemble and test the elevator, complete required approvals, and explain operation and ongoing care.
Timing depends on site preparation, the selected model and local requirements.
Can a home elevator be added to an existing Oregon home?
Yes. PVE elevators are designed for retrofits and don’t require a pit, shaft, or separate machine room, which makes them a practical option for older Oregon homes with tight basements or hillside lots.
How much space does a PVE elevator need?
A PVE elevator has a compact, self-supporting footprint that varies by model and rests on the existing floor, so it can usually be placed without a major layout change.
Is a home elevator a good option for aging in place?
Many Oregon homeowners install a PVE elevator specifically to stay in a multi-story home longer, connecting a main floor to an upstairs bedroom or basement without relying on stairs.
Do I need a machine room or pit?
No. The self-supporting design eliminates the need for a hoistway, pit, or separate machine room that a traditional hydraulic elevator would require.
What does a home elevator cost in Oregon?
Cost depends on the model, the number of floors served, and site-specific factors like ceiling height and finish work. A local PVE dealer can walk through pricing for your specific home.
What permits are required in Oregon?
Elevator installation, alteration, and modernization work in Oregon requires permits through the state’s Building Codes Division, and the installing contractor must hold a valid Oregon elevator contractor license. The work is governed by the Oregon Elevator Specialty Code, which is administered statewide rather than city by city.
Is there a PVE model for wheelchair accessibility?
Yes. PVE offers models designed to accommodate wheelchair access. A dealer can help identify which model fits your home and mobility needs.
Service area
Serving Homeowners Across Oregon
PVE dealers serve homeowners throughout Oregon, from Portland and the surrounding Willamette Valley to Bend and communities across the state. Wherever you’re located in Oregon, there’s a dealer ready to help you find the right fit for your home.
- Portland
- Salem
- Gresham
- Hillsboro
- Beaverton
- Bend
- Medford
- Eugene
More from PVE
Looking for something different?
Contact us
Request a quote for your home.
Tell us where you are planning to install an elevator in Oregon and what you need it to do. Share the number of floors, whether the home is already built, and any mobility or space requirements.
- Head office4151 West 108th Street, Suite #1, Hialeah, FL 33018
- Phone(855) 282-8087
- Email[email protected]
- HoursMon - Fri 8am - 4pm EST | Sat - Sun Closed