Home elevators · Gig Harbor, WA
Home Elevators in Gig Harbor, WA
Quiet Power. Small Footprint. Room With a View.
- 3 Sizes Available
- Panoramic Design
- No Shaft, Pit, or Machine Room Required
- Installed in 2 to 3 Days
- Pneumatic Technology
Get a free quote
15,000+
installations worldwide
90+
countries served
2002
manufacturing since
2–3
days to install
50 ft
maximum travel
Home elevators in Gig Harbor
The World's Only Air-Driven Home Elevator.
Now Serving Homeowners Throughout Gig Harbor
A PVE home elevator uses air pressure to raise the cab and gravity to lower it. With no pit, machine room, or hydraulic system required, waterfront and hillside homeowners can add floor-to-floor access without major construction.
Models
4 Models.
One for Every Home.
Whether you live in a waterfront home along the harbor, a hillside home with a daylight basement, or a newer build in Gig Harbor North, there is a PVE model built for your space.
PVE30
Compact living
30 inches | 1 passenger
Start here for one rider when conserving floor space is a priority.
PVE37
Room for two
37 inches | 2 passengers
Compare this round model when you want room for two riders within its rated capacity.
PVE52
Wheelchair-fit assessment
52 11/16 inches | 3 passengers
Start here when wheelchair access is a project requirement. Confirm the chair, rider, door opening and cabin fit together.
The Cube
A different perspective
36 x 36 inches | 2 passengers
Consider this square model for a two-person layout, including potential corner placement after a site review.
PVE52 wheelchair suitability depends on the individual chair and user. Residential wheelchair access does not mean ADA compliance.
Why PVE
Built for the Way Gig Harbor Lives
Gig Harbor homes often span multiple levels to capture waterfront or hillside views, with finished basements and upper-floor living spaces connected by stairs. Sloped lots and specialized foundations can make traditional elevator pits and shafts difficult to accommodate.
That’s exactly the kind of home a PVE elevator was built for. Because the unit is self-supporting and needs no pit, shaft, or machine room, it can go into a waterfront home with a finished basement or a hillside home with a daylight lower level without a major structural rework. Most installations are done in two to three days, which matters for a home where residents want to avoid disrupting a carefully sited foundation or a view-oriented layout.
For homeowners planning to stay in their Gig Harbor home long term, a PVE elevator means the basement or the upstairs primary suite stops requiring the stairs every time. It connects levels without reworking the home’s relationship to the water or the hillside. And because the system draws minimal power and pairs easily with solar, it fits naturally alongside the growing interest in energy-efficient upgrades across the Puget Sound region.
The Cleanest Home Elevator on the Market
Gig Harbor homeowners often want efficient, low-maintenance upgrades for waterfront and hillside properties. A PVE elevator uses no oils, hydraulic fluid, or lubricants, and gravity lowers the cab, reducing leak risks and service needs.
It runs on standard household current at low draw and works with many solar-equipped homes. With no hydraulic reservoir or fluid to maintain, ownership stays simple.
The most sustainable home elevator available. Anywhere.
Why Homeowners Choose PVE
- Certified and Safety-TestedEvery PVE elevator is built to meet national safety standards and independently tested before it ever reaches a home. If power is interrupted, the cab descends safely on its own rather than stopping mid-shaft.
- Ready for a Power OutageGig Harbor sees its share of winter storms and power outages. If the power fails while the elevator is moving, the cab descends to the lowest level at safety speed and the mechanical door lock opens so passengers can exit.
- Designed to Be Seen, Not HiddenThe 360-degree glass cab isn’t boxed into a closet or hallway. It becomes part of the room, showing off natural light and, in plenty of Gig Harbor homes, a view of the water or Mount Rainier from an unexpected angle.
- Low Maintenance by DesignThere are no oils, gases, or lubricants to top off or replace. That means fewer service calls and less to worry about long after installation.
- No Shaft, No Pit, No Machine RoomThe structure supports itself, so it can go into an existing home without a foundation dig or a dedicated equipment room, which matters on Gig Harbor’s waterfront and hillside lots where excavation adds cost and complexity.
- Built and Tested Before It ShipsEvery unit is assembled and tested at PVE’s factory before it’s shipped, including installations throughout Gig Harbor, so what arrives on site is ready to install, not ready to troubleshoot.
Gallery
Real PVE installations
Testimonials
What homeowners say
My house was built in 1925 and it was hard to get something to fit in with the décor of my home, but the PVE fit in perfectly. I am thrilled with the design, engineering, and reliability of the elevator by PVE.
PVE homeowner
We are not age-limited with the elevator. At any age, it’s like living on a single floor. We’ve been here 5 years and it’s never needed anything. The elevator has been flawless.
PVE homeowner
It Turns A 2-Story Into A Ranch Concept! It’s for the ease & access but also for the resale. In think the investment is worth it!
PVE homeowner
From idea to installation
What happens during installation?
Your installation plan should cover the work before the elevator arrives as well as assembly and testing.
- Review the homeConfirm the layout, the people using the elevator and the levels it needs to serve.
- Confirm the model and locationCheck dimensions, landing access and the requirements for the selected configuration.
- Prepare the siteComplete the agreed structural and electrical work and arrange the required permits and inspections.
- Install and hand overAssemble and test the elevator, complete required approvals, and explain operation and ongoing care.
Timing depends on site preparation, the selected model and local requirements.
Can a home elevator be added to an existing Gig Harbor home?
Yes. PVE elevators are designed for retrofits and don’t require a pit, shaft, or separate machine room, which makes them a practical option for waterfront homes and hillside homes with daylight basements.
How much space does a PVE elevator need?
Most models fit in a footprint similar to a large closet, roughly 30 to 52 inches in diameter depending on the model, so it can usually be placed without a major layout change.
Is a home elevator a good option for aging in place?
Many Gig Harbor homeowners install a PVE elevator specifically to stay in a multi-level home longer, connecting a main floor to a basement or upstairs primary suite without relying on stairs.
Do I need a machine room or pit?
No. The self-supporting design eliminates the need for a hoistway, pit, or separate machine room that a traditional hydraulic elevator would require, which matters on a waterfront lot where excavation near the shoreline can raise additional review.
What does a home elevator cost in Gig Harbor?
Cost depends on the model, the number of floors served, and site-specific factors like ceiling height and finish work. A local PVE dealer can walk through pricing for your specific home.
What permits are required in Gig Harbor?
Elevator installation in Washington requires a permit through the local building department, and the installing contractor must hold a valid Washington state elevator contractor’s license. Homes along the shoreline may also fall under the City of Gig Harbor’s shoreline and critical area regulations, so it’s worth confirming requirements with the city’s Building Permits office early in the process.
Is there a PVE model for wheelchair accessibility?
Yes. PVE offers models designed to accommodate wheelchair access. A dealer can help identify which model fits your home and mobility needs.
Service area
Serving Homeowners Across Washington
PVE dealers serve homeowners throughout Gig Harbor and the South Puget Sound region, from the waterfront to the surrounding hillside communities. Wherever you’re located, there’s a dealer ready to help you find the right fit for your home.
More from PVE
Looking for something different?
Contact us
Request a quote for your home.
Tell us where you are planning to install an elevator in Gig Harbor, WA and what you need it to do. Share the number of floors, whether the home is already built, and any mobility or space requirements.
- Head office4151 West 108th Street, Suite #1, Hialeah, FL 33018
- Phone(855) 282-8087
- Email[email protected]
- HoursMon - Fri 8am - 4pm EST | Sat - Sun Closed
