Home elevators · Seattle, WA
Home Elevators in Seattle, WA
Quiet Power.
Small Footprint.
Room With a View.
- 3 Sizes Available
- Panoramic Design
- No Shaft, Pit, or Machine Room Required
- Installed in 2 to 3 Days
- Pneumatic Technology
Get a free quote
15,000+
installations worldwide
90+
countries served
2002
manufacturing since
2–3
days to install
50 ft
maximum travel
Home elevators in Seattle
The World's Only Air-Driven Home Elevator.
Now Serving Homeowners Throughout King County
A PVE home elevator moves your cab using changes in air pressure instead of a hydraulic piston, cable, or counterweight system. A vacuum pump at the top of the unit gently pulls air from below the cab, and it rises. To descend, air is let back in and gravity does the rest. There’s no pit to dig, no separate machine room to build, and no oil-based hydraulic system to maintain. Homeowners from Queen Anne to West Seattle, and out toward Bellevue and Redmond, are installing PVE elevators to move easily between floors without a major construction project.
Models
4 Models.
One for Every Home.
Whether you live in a Craftsman bungalow in Wallingford, a hillside view home on Queen Anne, or a townhouse near Ballard, there is a PVE model built for your space.
PVE30
Compact living
30 inches | 1 passenger
Start here for one rider when conserving floor space is a priority.
PVE37
Room for two
37 inches | 2 passengers
Compare this round model when you want room for two riders within its rated capacity.
PVE52
Wheelchair-fit assessment
52 11/16 inches | 3 passengers
Start here when wheelchair access is a project requirement. Confirm the chair, rider, door opening and cabin fit together.
The Cube
A different perspective
36 x 36 inches | 2 passengers
Consider this square model for a two-person layout, including potential corner placement after a site review.
PVE52 wheelchair suitability depends on the individual chair and user. Residential wheelchair access does not mean ADA compliance.
Why PVE
Built for the Way Seattle Lives
Seattle is a city of hills and old wood-frame houses. Neighborhoods like Queen Anne, Capitol Hill, and Magnolia are full of Craftsman bungalows and early 1900s homes with narrow floor plans, steep interior stairs, and finished basements that were never meant to be easy to reach. Many of these houses were built before anyone thought about aging in place, and a lot of them sit on lots where digging a hoistway pit isn’t realistic or affordable.
That’s exactly the kind of home a PVE elevator was built for. Because the unit is self-supporting and needs no pit, shaft, or machine room, it can go into a Craftsman bungalow on Capitol Hill or a view home on Queen Anne Hill without touching the foundation. Most installations are done in two to three days, which matters in a city where remodeling permits and contractor schedules can otherwise stretch a simple project out for months.
For homeowners planning to stay in their Seattle home long term, a PVE elevator means the stairs stop being the reason to move. It connects a main floor to an upstairs primary suite or a daylight basement without hallways or landings feeling reworked around it. And because the system draws minimal power and pairs easily with solar, it fits naturally into a city where rooftop solar and energy-conscious upgrades are increasingly common on older homes.
The Cleanest Home Elevator on the Market
Seattle homeowners have been ahead of the curve on energy efficiency and green building for years, and that mindset carries over into how people think about home upgrades. A PVE elevator uses no oils, no hydraulic fluid, and no lubricants, and it uses gravity, not motor power, to bring the cab back down. There’s nothing to leak into an old basement and nothing that requires the kind of ongoing servicing a hydraulic system does.
Because the system runs on standard household current at low draw, it works well alongside an existing solar array, a common feature on updated homes in and around Seattle. There’s no hydraulic fluid to dispose of and no reservoir to maintain.
The most sustainable home elevator available. Anywhere.
Why Homeowners Choose PVE
- Certified and Safety-TestedEvery PVE elevator is built to meet national safety standards and independently tested before it ever reaches a home. If power is interrupted, the cab is designed to descend safely on its own rather than stopping mid-shaft.
- Ready for a Power OutageSeattle sees its share of winter storms and power blips. If the power fails while the elevator is moving, the cab descends to the lowest level at safety speed and the mechanical door lock opens so passengers can exit.
- Designed to Be Seen, Not HiddenThe 360-degree glass cab isn’t boxed into a closet or hallway. It becomes part of the room, showing off natural light and, in plenty of Seattle homes, a view of the Sound or the skyline from an unexpected angle.
- Low Maintenance by DesignThere are no oils, gases, or lubricants to top off or replace. That means fewer service calls and less to worry about long after installation.
- No Shaft, No Pit, No Machine RoomThe structure supports itself, so it can go into an existing home without a foundation dig or a dedicated equipment room, which matters in older Seattle houses with tight basements.
- Built and Tested Before It ShipsEvery unit is assembled and tested at PVE’s factory before it’s shipped, including installations throughout Washington, so what arrives on site is ready to install, not ready to troubleshoot.
Gallery
Real PVE installations
Testimonials
What homeowners say
My house was built in 1925 and it was hard to get something to fit in with the décor of my home, but the PVE fit in perfectly. I am thrilled with the design, engineering, and reliability of the elevator by PVE.
PVE homeowner
We are not age-limited with the elevator. At any age, it’s like living on a single floor. We’ve been here 5 years and it’s never needed anything. The elevator has been flawless.
PVE homeowner
It Turns A 2-Story Into A Ranch Concept! It’s for the ease & access but also for the resale. In think the investment is worth it!
PVE homeowner
From idea to installation
What happens during installation?
Your installation plan should cover the work before the elevator arrives as well as assembly and testing.
- Review the homeConfirm the layout, the people using the elevator and the levels it needs to serve.
- Confirm the model and locationCheck dimensions, landing access and the requirements for the selected configuration.
- Prepare the siteComplete the agreed structural and electrical work and arrange the required permits and inspections.
- Install and hand overAssemble and test the elevator, complete required approvals, and explain operation and ongoing care.
Timing depends on site preparation, the selected model and local requirements.
Can a home elevator be added to an existing Seattle home?
Yes. PVE elevators are designed for retrofits and don’t require a pit, shaft, or separate machine room, which makes them a practical option for older Seattle homes with tight basements or hillside lots.
How much space does a PVE elevator need?
Most models fit in a footprint similar to a large closet, roughly 30 to 52 inches in diameter depending on the model, so it can usually be placed without a major layout change.
Is a home elevator a good option for aging in place?
Many Seattle homeowners install a PVE elevator specifically to stay in a multi-story home longer, connecting a main floor to an upstairs bedroom or basement without relying on stairs.
Do I need a machine room or pit?
No. The self-supporting design eliminates the need for a hoistway, pit, or separate machine room that a traditional hydraulic elevator would require.
What does a home elevator cost in Seattle?
Cost depends on the model, the number of floors served, and site-specific factors like ceiling height and finish work. A local PVE dealer can walk through pricing for your specific home.
What permits are required in Seattle?
The Seattle Department of Construction and Inspections requires a conveyance permit for elevator installation, and the installing contractor must hold a valid Washington state elevator contractor’s license. Most permits are issued within about 14 business days.
Is there a PVE model for wheelchair accessibility?
Yes. PVE offers models designed to accommodate wheelchair access. A dealer can help identify which model fits your home and mobility needs.
Service area
Serving Homeowners Across Washington
PVE dealers serve homeowners throughout the Puget Sound region and beyond, from the hillside neighborhoods of Seattle to the growing suburbs of the Eastside and south to Tacoma. Wherever you’re located in Washington, there’s a dealer ready to help you find the right fit for your home.
- Seattle
- Bellevue
- Tacoma
- Redmond
- Kirkland
- Renton
- Everett
- Bellingham
- Spokane
- Olympia
- Gig Harbor
More from PVE
Looking for something different?
Contact us
Request a quote for your home.
Tell us where you are planning to install an elevator in Seattle, WA and what you need it to do. Share the number of floors, whether the home is already built, and any mobility or space requirements.
- Head office4151 West 108th Street, Suite #1, Hialeah, FL 33018
- Phone(855) 282-8087
- Email[email protected]
- HoursMon - Fri 8am - 4pm EST | Sat - Sun Closed
